NanoTreat 1810
BIO-AUGMENTATION LIQUID
CONTAINS NO
PATHOGENIC BACTERIA
ELIMINATES
OFFENSIVE ODORS
REDUCES BOD AND
COD
NON CAUSTIC NON ACIDIC
For use in all
plumbing and sewage treatment plants
CAUTION: KEEP OUT OF REACH OF CHILDREN
For commercial and
Industrial use only, or for sale to, use and storage by service persons.
This
product is a stable, liquid suspension of spores and vegetative microorganisms
capable of digesting complex proteins, starches, fats and cellulose as well as vegetable
gums. It is alive with active
microorganisms which are hybrid strains therefore, it will degrade paper, fats,
oils and grease at an accelerated rate.
These highly activated stable cultures will grow either in the presence
or absence of all. The use of this
product in drain lines and pipes in conjunction with a consistent preventive
maintenance program will eliminate sludge, grease, fats, scum and sewage that
often block drain pipes and lines. Pour
directly into the drain at a time when the least flow is expected.
LIFT
STATIONS: Treat directly as the well
fills and add at least 3-5 gallons per million gallons of flow-through
capacity. Repeat with 1 gallon
treatment per week as a preventative maintenance program to maintain odor free.
SEPTIC
TANKS: Use 1 ounce every week for
every person using the system. Less
frequent use is possible if you can determine solids level in your tank.
OXIDATION
LAGOONS: Maintain regular dose of 1-2
gallons per million gallon flow. Use
dilution factors depend on the type of feeding equipment. A lagoon generally contains undigested
solids on the bottom which will require daily treatment until nuisance odors
are eliminated. Then preventative
maintenance dosage can be instituted.
DIGESTER
PUMPS: After the pumping of
sediment sludge, clean the pump of residual sludge by diluting 1 pint of the
concentrate to 10 pints of water and feed through vacuum side of the pump. Allow this mixture to remain in the pipes
and pump for at least 24 hours.
ODOR
CONTROL: For control of malodors of
digestion sludge, dilute 1 quart per 5 gallons of water and thoroughly wet the
sludge with this mixture. Repeat the
procedure every 24 hours or as new sludge is added.
This information is
believed reliable; however, all recommendations are made without guarantee,
since the conditions of use are beyond our control. This product is sold without warranty, expressed or implied, and
on the condition that purchasers shall make their own tests to determine the
suitability of this product for their purposes and that all risks are assumed
by the user. Statements made herein
shall not be construed to be recommendations to infringe any patent.