Installing a Water Filter? Here's All You Need to Know

Installing an under-the-sink water filter is not asfor the screw holes.
frustrating a task that you might imagine it would be.Next, drill holes using a bit that is slightly smaller than
If you follow a few basic instructions, you will soonthe screws in the places indicated by your markings.
have filtered, clean and great tasting water flowingLift and align the unit with your drilled holes and use
from your tap.the screws to attach it to the wood. The pre-drilled
Under the sink water filtration systems provide youholes will make it easier to be screwed in, but will still
and your family with clean, contaminate-free water inremain strong and snug if the pre-drilled holes are a
the area that you need it the most - the kitchen.smaller diameter than the screws.
The kitchen is where you do most of your drinkingMake sure your cold-water inlet is shut off
and cooking, so it makes sense to install ancompletely. You may also need to turn off the hot
under-the-sink water filter at this faucet.water inlet to insure it doesn't back flow through the
The first thing you need to do is select the type offaucet when you disconnect the water lines.
water filter that is right for your family's needs.Depending on the plumbing in your house, you may
There are a variety of water filtration systemsneed to shut off the water supply where it enters
available that target specific contaminates, bacteriayour home. Once the water is turned off, open the
and chemicals. If you don't know what kind oftap to allow the remaining water to be eliminated.
contaminates are in your water supply, have a waterNow you can disconnect the flexible water line from
treatment company perform an evaluation of yourthe inlet and re-connect it to the outlet point on the
tap water. They can help you decide on the bestwater filter. Attach the flexible line that came with
course of action - and the right water filter - for yourthe unit to the inlet cut-off and the input point on the
specific situation. Whichever water filtration unit youwater filtration system. Make sure all connections are
select, it should be adaptable to change filtrationtight and secure before you turn the water supply
cartridges as your needs change.back on.
You'll need wrenches that fit the size of the nuts onLet the water flow for a few minutes to dislodge
your plumbing connections under the sink. You'll alsoany sediment and purification material loose inside the
need a drill and a screwdriver (or screwdriverfilter. Before you know it, you have clean filtered
attachment for your drill). After you surmise that thewater flowing directly from your kitchen faucet for
wood underneath your sink can support the weightthe whole family to enjoy.
of a water filtration system, mark the proper spacing